Industry News

Discussion on the Influence of Shrinkage Rate on TPE Product Molding

When a material is molded, it will shrink due to cooling, resulting in a product size smaller than the mold size. The molding shrinkage rate is expressed as a percentage to indicate the degree of shrinkage. Generally, crystalline resins shrink more than amorphous resins. The molding shrinkage rate can be moderately adjusted by adjusting molding conditions such as injection temperature and pressure.

TPE Wire Extrusion Adhesion and Surface Smoothness Problem Analysis

TPE wire is composed of one or more flexible conductors, covered with a soft and light sheath; cable is composed of one or more insulated conductors, covered with a tough outer layer of metal or rubber. Cables and wires generally consist of three parts: core, insulation, and protective outer sheath. TPE wire

What is TPE and why is it favored by customers?

With the rapid development of China's domestic economy, more and more international TPE manufacturers have started to set up factories in China to produce TPE, and the rapid development of the automotive industry has further driven the TPE market. In recent years, the environmental protection appeal of TPE has been increasing, and in many fields, TPE is gradually replacing PV in energy conservation and environmental protection.

Analysis of Cold Material Issues in Hot Runner Processing of TPE Elastomers

Hot runner molds are molds that use external heating devices to keep the melt in the runner from solidifying. Compared to traditional molds, they have advantages such as shorter molding cycles, material savings, and improved surface quality and mechanical properties of products, and are thus rapidly developing in the plastic processing industry. Hot runner molds have been successfully used to process various plastics.

Shenzhen Polymer Industry Association 9th Second Member Representative Conference - Ju Ye Technology TPE

On the afternoon of March 25, 2021, the 9th Second Member Representative Conference and the 9th Second Council Enlarged Meeting of Shenzhen Polymer Industry Association were held in the Grand Ballroom on the 5th floor of Shenzhen Metro Crowne Plaza Hotel. After experiencing the once-in-a-century COVID-19 pandemic, the meeting originally scheduled for January 19 was finally held in beautiful Shenzhen.

Advantages of Thermoplastic Vulcanizate (TPV) Material

JuYe TPV, natural color TPV, black TPV, original color TPV, TPV manufacturer, TPV factory, 65A TPV, 55A TPV, 60A TPV

Some Suggestions for Handling Dullness in TPR Injection Molding

This is an article from Baidu Baike. I have encountered similar situations before. The customer uses TPR and requires the surface of the TPR product to be glossy, but not too shiny. Roughly, it means there should be an obvious luster, but it should not be obvious that some additives have been added. So, TPR products injection molding

Discussion on Three Major Problems of Self-Adhesive Properties of TPE and TPR Materials

Conventional TPE and TPR do not have functional viscosity, but need to be adjusted through the compounding system to obtain the required adhesion. With the continuous deepening and expansion of the application of thermoplastic elastomers TPE and TPR, the adhesive properties of TPE and TPR (including self-adhesion and co-adhesion) can be gradually applied to different industries.