Advantages of Anhui Sports Equipment TPR

In the elastomer industry, TPE usually refers to a composite functional material obtained by modifying SEBS.

Since any impurities in TPE materials may affect the transparency of the product, attention must be paid to sealing during storage, transportation, and feeding to ensure the TPE raw materials are clean. In particular, if TPE raw materials contain moisture, heating will cause the raw materials to deteriorate, so they must be dried. During injection molding, a dry hopper must be used for feeding.

TPE high-transparency materials have different product properties in different applications. Thermoplastic elastomer, also called TPE material, transparent TPE not only has the processing properties of thermoplastic plastics but also the physical properties of vulcanized rubber. This is the so-called advantageous combination of plastic and rubber. Transparent TPE is widely used in people's daily life and production.

Sports Equipment TPR

TPE elastomer soft rubber has excellent comprehensive properties and is the most commonly used soft rubber material for secondary injection molding, overmolding, and two-color injection molding.

TPE overmolding, as the name suggests, is to overmold TPE soft rubber material onto other materials.

TPE is a classic aggregation-induced emission molecule, meaning it has no fluorescence in solution but strong fluorescence in the solid state. Therefore, transparent TPE materials also have important applications in organic optoelectronics and other fields.

Transparent grade is divided into transparent and translucent series, each with various hardness levels; excellent transparency; smooth and soft surface; good anti-yellowing performance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

Sports Equipment TPR

Common processing methods include one-step molding with a two-color injection molding machine, or using a regular injection molding machine with an overmolding mold for two-step injection molding. Products molded with TPE overmolding are generally handles and grips. TPE soft rubber material has a special comfortable touch, and the introduction of TPE material improves the grip and tactile feel of the product.

TPE material has good fluidity and is mainly used in injection molding.

The thickness of the TPE/TPR overmolding layer. In most overmolding applications, a wall thickness range of 1.5-3.0mm will ensure good adhesion. If the TPE layer is too thin, injection molding is difficult, adhesion strength is low, and the feel is poor. If the TPE layer is too thick, on the one hand, the cost is higher, and on the other hand, defects such as shrinkage and bubbles are prone to occur.

Transparent grade is divided into transparent and translucent series, each with various hardness levels; excellent transparency; smooth and soft surface; good anti-yellowing performance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

Sports Equipment TPR

TPE semi-finished toy products can be used for post-processing such as spray painting (spray painting, inkjet), screen printing, etc. Our company produces and sells TPE soft rubber materials, which can be used for injection molding to produce soft toys, imitation animal toys, plant toys, fruit toys, etc. The TPR provided has excellent color matching and spray oil characteristics, is environmentally friendly and non-toxic. Next, let's see what surprises TPE toy manufacturers bring us.