How is Tianjin BenSe TPE supplier?

TPE elastomer soft rubber is used for secondary injection molding, adhesive shooting.

Transparent TPE is applied to appliance casings, handles, grips, etc. It exhibits excellent hand feel, is non-slip and labor-saving, and is easy to color and process, with a wide design space.

Thickness of TPE/TPR covering layer. In most overmolding applications, a wall thickness range of 1.5-3.0mm ensures good adhesion. If the TPE layer is too thin, injection molding is difficult, adhesion strength is low, and hand feel is poor. If the TPE layer is too thick, on one hand cost is higher, on the other hand defects such as shrinkage and bubbles may occur.

BenSe TPE supplier

Because TPE material has good slip resistance and elastic touch, it can improve the touch feel of products and enhance grip.

POM overmolding of POM. Although POM has a low melting point of only 180°C.

Since any impurity in TPE material may affect product transparency, attention must be paid to sealing during storage, transportation, and feeding to ensure TPE raw material cleanliness. Especially if TPE raw material contains moisture, it will cause deterioration upon heating, so it must be dried. During injection molding, a drying hopper must be used for feeding.

Transparent TPE is applied to appliance casings, handles, grips, etc. It exhibits excellent hand feel, is non-slip and labor-saving, and is easy to color and process, with a wide design space.

BenSe TPE supplier

However, due to its high crystallinity, high energy is required to form a bonding layer on the overmolded surface. At the same time, due to the self-lubrication of POM, it is not conducive to the rapid coverage of TPE material on the surface of POM hard plastic parts.

During the molding process of TPE material, during the filling of the mold cavity,

Transparent TPE is used in stationery, sports equipment, etc., with good UV resistance, chemical resistance, and easy coloring and processing properties.

Styrenic transparent TPE is widely used in footwear industry, largely replacing rubber; at the same time, its use in industrial rubber products such as rubber sheets and plates is expanding.

BenSe TPE supplier

If the filling performance of the product is poor, there will be too much pressure reduction, too long filling time, unqualified filling, etc., causing quality problems.