How about the quotation of thermoplastic TPR material in Hunan?

TPE elastomer soft gel is used for secondary injection molding, overmolding and injection bonding.

Transparent TPE is used in stationery, sports equipment, etc. It has good UV resistance, chemical resistance, and is easy to color and process.

Transparent TPE material requires high transmittance, so the surface quality of the material products must be strict, without any defects such as streaks, pores, whitening, halo, black spots, discoloration, poor gloss, etc. Therefore, during the entire injection molding process, strict and even special attention must be paid to TPE raw materials, equipment, molds, and even product design.

Thermoplastic TPR material

Because TPE material has good anti-slip properties and good elastic touch, it can improve the touch feel of products and enhance grip.

Overmolding of POM with POM. Although POM has a low melting point of only 180℃.

Transparent grades are divided into transparent and translucent series, each with various hardness; excellent transparency; smooth and soft surface; good anti-yellowing performance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

Since any impurity in TPE material may affect the transparency of the product, attention must be paid to sealing during storage, transportation, and feeding to ensure clean TPE raw materials. Especially if TPE raw materials contain moisture, heating will cause deterioration, so they must be dried. During injection molding, a drying hopper must be used for feeding.

Thermoplastic TPR material

However, due to its high crystallinity, higher energy is required to form a fusion layer on the overmolding surface. At the same time, due to the self-lubricating property of POM, it is not conducive to the rapid overmolding of TPE material on the surface of hard POM plastic parts.

TPE as raw material. TPE material manufacturers have environmental protection, non-toxic, good elasticity, smooth surface. In addition,

Transparent TPE is used in stationery, sports equipment, etc. It has good UV resistance, chemical resistance, and is easy to color and process.

SEBS is the product of hydrogenation of SBS. SEBS has a saturated molecular structure, which leads to very different characteristics. It has the necessary anti-aging, anti-yellowing and other properties required for producing transparent TPE, and also contributes to excellent properties such as high temperature resistance and corrosion resistance. Only then was transparent TPE made.

Thermoplastic TPR material

The surface is not easy to attract dust, has good thermal conductivity, excellent anti-fouling performance. Through skin safety and non-sensitization tests, it meets the characteristics that silicone cannot meet, making the appearance more high-end and exquisite. The TPE industry positions it as the preferred high-end raw material.