How about the quotation of Jiangsu raw material TPE manufacturers?

At the interface between hard plastic and soft rubber, a bonding layer is formed.

The wall thickness of TPE should be as uniform as possible to achieve the best molding cycle. The transition between different wall thicknesses should be gradual to reduce flow-related problems such as gas marks and bubbles.

The thickness of the TPE/TPR overmolding layer. In most overmolding applications, a wall thickness range of 1.5-3.0mm ensures good adhesion. If the TPE layer is too thin, injection molding is difficult, adhesion strength is low, and the feel is poor. If the TPE layer is too thick, on one hand the cost is higher, and on the other hand, defects such as sink marks and bubbles are prone to occur.

Raw material TPE manufacturer

Greatly improves the overmolding adhesion between TPE soft rubber and hard plastic. False overmolding hardly involves the compatibility of the two materials; the material is bonded through mechanical force, via mold and product design and surface treatment, through interlocking action, so that the soft rubber and hard plastic can be joined together.

TPE is processed by overmolding injection bonding, commonly used products such as handles, grips, electronic materials, etc.

Transparent grade includes transparent and translucent series, each with various softness and hardness; excellent transparency; smooth and soft surface; good anti-yellowing performance, tear resistance, tensile strength; meets environmental requirements; suitable for various transparent series products.

Transparent TPE is used in appliance housings, handles, grips, etc., exhibiting very good hand feel, with non-slip and labor-saving properties, and easy coloring and processing. It also has a wide design space.

Raw material TPE manufacturer

The material endows the product with a comfortable touch, improves grip, enhances product aesthetics and added value. Most products are exported to developed countries and regions such as the United States, Japan, and the European Union.

Preheating the insert before overmolding helps improve bonding strength,

Transparent TPE is used in appliance housings, handles, grips, etc., exhibiting very good hand feel, with non-slip and labor-saving properties, and easy coloring and processing. It also has a wide design space.

Diene transparent TPE. Diene TPE is mainly an isomer of natural rubber, so it is also called thermoplastic trans-natural rubber. Although its heat resistance and mechanical strength are not as good as rubber, due to its good transparency, weather resistance, electrical insulation, and photodegradability, it is widely used in shoemaking, sponges, optical films, and other industrial rubber products.

Raw material TPE manufacturer

Because the preheating process can improve the compatibility between the insert material and TPE. The appropriate temperature of the insert needs to be discussed and determined with the material supplier.