How to choose Anhui TPR material manufacturers

TPE adopts overmolding injection processing, common products such as handles, grips, electronic materials, etc.

Olefin-based transparent TPE has good weather resistance and ozone resistance, so it is called the fastest developing variety in TPE. It is mainly used as the main rubber material in fields such as automobiles and home appliances.

Transparent TPE materials have different product properties when applied in different aspects. Thermoplastic elastomer, also known as TPE material, not only has the processing properties of thermoplastics, but also has the physical properties of vulcanized rubber. This is the so-called advantageous combination of plastic and rubber. Transparent TPE is widely used in people's life and production.

TPR material manufacturers

The material gives the product a comfortable touch, improves grip, enhances product aesthetics and added value. Most products are exported to developed countries and regions such as the United States, Japan, and the European Union.

Overmolding POM on POM. Although POM has a low melting point of only 180°C.

Styrenic transparent TPE is widely used in the footwear industry, largely replacing rubber. At the same time, its use in industrial rubber products such as adhesive tape and rubber sheets is also expanding.

TPE, TPR overmolding layer thickness. In most overmolding applications, a wall thickness range of 1.5-3.0mm will ensure good adhesion. If the TPE layer is too thin, injection molding is difficult, bond strength is low, and hand feel is poor. If the TPE layer is too thick, on one hand the cost is higher, and on the other hand defects such as shrinkage and bubbles are prone to occur.

TPR material manufacturers

However, due to its high crystallinity, high energy is required to form a bonding layer on the covered surface. At the same time, due to the self-lubricating property of POM, it is not conducive to the rapid overmolding of TPE material on the surface of hard plastic parts of POM.

Juye focuses on the research, development, production and sales of TPE toy materials and TPE soft rubber.

Transparent TPE material requires high light transmittance, which inevitably requires strict surface quality of the material product. It must not have any defects such as streaks, pores, whitening, halo, black spots, discoloration, poor gloss, etc. Therefore, throughout the injection molding process, strict and even special requirements must be paid attention to in TPE raw materials, equipment, molds, and even product design.

Since any impurities in TPE materials may affect the transparency of the product, attention must be paid to sealing during storage, transportation and feeding to ensure that the TPE raw materials are clean. Especially if the TPE raw materials contain moisture, heating will cause deterioration, so they must be dried. During injection molding, a dry hopper must be used for feeding.

TPR material manufacturers

It can be used in injection molding to produce soft toys, simulated animal toys, plant toys, fruit toys, etc. The provided TPE has excellent color matching and spray oil characteristics, is environmentally friendly and non-toxic, and can provide customized TPE toy material solutions according to the customer's specific requirements.