Advantages of Jiangxi Thermoplastic TPE Manufacturers

A bonding layer is formed at the interface between hard plastic and soft plastic.

The wall thickness of TPE positions should be as uniform as possible to achieve the best molding cycle. The transition between different wall thicknesses should be gradual to reduce problems caused by fluid flow, such as gas marks and bubbles.

Since any impurities in TPE materials may affect the transparency of the product, attention must be paid to sealing during storage, transportation, and feeding to ensure clean TPE raw materials. Especially if TPE raw materials contain moisture, heating will cause deterioration, so they must be dried. During injection molding, a dry hopper must be used for feeding.

Thermoplastic TPE manufacturer

Greatly improve the bonding adhesion between TPE soft plastic and hard plastic. False overmolding hardly involves the compatibility of the two materials. The material is bonded through mechanical force, through the design of the mold and product as well as surface treatment, and through locking effect, so that the soft plastic and hard plastic can be joined together.

TPE uses overmolding injection processing. Common products include handles, grips, electronic materials, etc.

To achieve the matte appearance of thermoset rubber surface, a rougher mold surface is required. Generally speaking, the rough surface produced by EDM on the mold cavity will produce excellent workpiece appearance and make demolding easier. Grinding methods such as steam blasting, sandblasting, or shot blasting, as well as chemical etching, can also be used to produce surfaces with different gloss and appearance.

The transparent grade includes transparent and translucent series, each with various hardness; excellent transparency; smooth and soft surface; good anti-yellowing performance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

Thermoplastic TPE manufacturer

The material gives the product a comfortable touch, improves grip, enhances product aesthetics and added value. Most products are exported to developed countries and regions such as the United States, Japan, and the European Union.

During the molding process of TPE material, during the filling of the mold cavity,

TPE high-transparency material has different product properties in different applications. Thermoplastic elastomer, also known as TPE material, transparent TPE not only has the processing properties of thermoplastic plastics but also the physical properties of vulcanized rubber. This is the so-called advantage combination of plastic and rubber. Transparent TPE is widely used in people's daily life and production.

Transparent TPE is used in household appliance shells, handles, grips, etc., showing a very good hand feel, anti-slip and labor-saving, and easy coloring and processing. It also has a wide design space.

Thermoplastic TPE manufacturer

If the filling performance of the product is not good, there will be too much decompression, too long filling time, unqualified filling, etc., causing quality problems in the product.