Juye Technology to Exhibit at 2026 China International Plastics Exhibition_Thermoplastic Elastomer Materials

<\/b><\/h2>

X. TPE Overmolding Materials for PC\/ABS and PA Substrates<\/b><\/h2>

<\/b><\/h2><\/div>

The combination of soft and hard plastics can bring a soft grip, anti-slip experience, and more structural design options to products. To achieve a good overmolding effect, it is necessary to pay attention to the soft plastic material, the hard plastic substrate, the part structure, and the molding process at the same time. Juyet Technology provides TPE overmolding material selection and modification support for PC\/ABS and PA substrates, and works with customers to evaluate material solutions around overmolding bonding, soft plastic hardness, touch feel, and processing performance.<\/div>

<\/div>

To improve communication efficiency, it is recommended to provide the following information when consulting:<\/div>

<\/div>

• Substrate grade:<\/strong>Identify whether it is PC, ABS, PC/ABS alloy, or PA6, PA66, and specify whether it contains fillers such as glass fiber;<\/li>\n
• Product requirements:<\/strong> target hardness, feel, appearance, and overmolding bonding requirements;<\/li>\n
• Structure and process:<\/strong> overmolding thickness, product structure, and molding method;<\/li>\n
• Service conditions:<\/strong> temperature, contact media, and other key environmental requirements.<\/li>\n <\/ul>\n <\/div>\n
  Overmolding performance may vary with different base material grades and processing conditions. Whether a specific material is suitable should be confirmed through testing with the actual base material and part.<\/div>

  
  <\/div>\n

  <\/div>\n\n

  
  <\/b><\/h2>

  XI. Material support for projects from requirement communication to sample validation<\/b><\/h2>

  
  

  Juye Technology is a thermoplastic elastomer enterprise integrating R&D, production, and sales, providing material support for fields such as consumer electronics, home appliances, daily necessities, toys, sports equipment, and automotive parts. We provide services from demand analysis, formula design, sample verification to mass production delivery, focusing on the performance of the material itself as well as its actual performance under customers' processing conditions.

  
  

  For new product development, adjustment of existing materials, or functional material needs, you are welcome to provide product samples, performance targets, and processing information to communicate with us. Through full communication and practical verification, material selection can be better grounded, and project advancement can have clearer direction.

  
  

  Twelve, Meet in Nanjing to Discuss Material Applications and Cooperation

  
  

  During the 2026 China International Plastics Exhibition, Juye Technology looks forward to exchanging with customers, partners, and industry peers, and jointly exploring cooperation opportunities around TPE, TPR, TPV, TPU, and TPEE materials, as well as flame retardant, antistatic, and encapsulation applications.

  
  

  Exhibition Information	Details
  Exhibition Name	2026 China International Plastics Exhibition & the 7th Exhibition of New Plastic Materials, New Technologies, New Equipment and New Products
  Exhibition Dates	October 28–30, 2026
  Exhibition Venue	Nanjing International Expo Center
  Juye Technology Booth	4D03-2 (Hall 4 · New Plastic Materials and Green Development Pavilion)
  Company Name	Dongguan Juye Plastic Technology Co., Ltd.
  Inquiry Phone	0769-82827851
  Contact Mobile	13827205072
  Company Website	www.juyetpe.com
  Company Email	[email protected]

  
  

  

  Exhibition Hall Distribution Map Source: Public information from the organizer of the 2026 China International Plastics Exhibition. Juye Technology's booth 4D03-2 is located in Hall 4 (Special Hall for New Plastic Materials and Green Development).

  
  

  

  Exhibition opening hours (subject to the organizer's on-site arrangements): October 28, 8:30—17:30; October 29, 8:30—17:00; October 30, 8:30—16:00.

  
  

  You are welcome to submit product application, target hardness, base material grade, and key performance requirements, and contact Juye Technology to inquire about material selection and sample testing, or to schedule an exhibition meeting in advance.

  
  

  
  

  Frequently Asked Questions (FAQ)

  
  

  1. How to choose the right elastomer material for a product?

  
  

  It is recommended to first clarify the product application, operating environment, target hardness, key performance requirements, and processing method, then evaluate based on material data and sample test results. A material name alone is usually not enough to determine a specific grade.

  
  

  2. What should be prepared when consulting about overmolding materials?

  
  

  It is recommended to provide the hard substrate grade, whether it contains glass fiber, the product structure, the target soft compound hardness, and existing processing conditions. If available, samples or photos of overmolding issues can also be provided to facilitate communication.

  
  

  3. How to confirm whether flame-retardant or antistatic materials meet requirements?

  
  

  Test standards, target indicators, and test conditions should be clarified in advance, and the corresponding grade data should be checked. Final verification still needs to be carried out in combination with actual parts and project requirements.

  
  

  4. Which materials will Juye Technology highlight at the 2026 China International Plastics Exhibition?

  
  

  We will focus on showcasing five major series of elastomer materials: TPE, TPR, TPV, TPU, and TPEE, as well as flame-retardant TPE and antistatic TPE functional materials, and TPE overmolding material solutions for PC/ABS and PA substrates. For specific selection, please visit booth 4D03-2 for on-site discussion.

  
  

  5. How can I find the Juye Technology booth during the exhibition?

  
  

  The exhibition is held at the Nanjing International Expo Center. Juye Technology is located at Booth 4D03-2 in Hall 4 (Plastic New Materials and Green Development Pavilion). You can navigate using the exhibition hall layout map above, or call 0769-82827851 / 13827205072 for on-site guidance.

  
  

  6. Can I get samples or have samples sent at the exhibition?

  
  

  Yes. Material sample pellets and sample bars are available on site, and free samples can also be sent after registering your information. We recommend informing us in advance of your application direction and target hardness so that we can bring more suitable grades to the exhibition and improve communication efficiency.

  
  

  7. Can I consult about materials even if I don't attend in person?

  
  

  Yes. You can contact us on weekdays by phone at 0769-82827851, by mobile/WeChat at 13827205072, by email at [email protected], or via the official website www.juyetpe.com. We support remote material selection and sample mailing, without being limited by exhibition schedules.

  
  

  8. What support can Juye Technology provide for new product development?

  
  

  We provide full-process support from requirements analysis and formulation design to sample validation and mass production delivery. We focus on how materials perform under customers' actual processing conditions, helping reduce trial and error and shorten development cycles.

  
  

  9. What products are flame-retardant TPE and antistatic TPE generally used in?

  
  

  Flame-retardant TPE is commonly used in parts with fire protection requirements, such as appliance housings, charger accessories, and wire sheaths; antistatic TPE is mostly used in scenarios where static electricity needs to be controlled, such as electronic packaging, industrial parts, and products for clean environments. Specific grades and indicators are subject to the TDS of the corresponding grade and testing under agreed conditions.

  
  

  10. What products are PC/ABS and PA overmolding materials suitable for?

  
  

  Suitable for products that require a combination of hard and soft, a soft grip, and anti-slip properties, such as tool handles, consumer electronics grips, home appliance buttons, and soft edges of automotive interiors. The overmolding effect is related to the base material grade, part structure, and molding process; it is recommended to evaluate with samples or base material information.

  
  

  About the Author

  This article was written by the technical team of Dongguan Juye Plastic Technology Co., Ltd. (Juye Plastic Technology), which mainly produces TPE / TPR / TPV / TPU / TPEE / TPV-SIR pellets, applied in four major directions: artificial flowers, pet toys, stress-relief toys, and two-shot injection molding.

  
  

  The material selection and performance descriptions in this article are general industry information; specific grades, performance data, and certifications are subject to the corresponding TDS and test results under agreed conditions. For material samples and selection support, please contact 0769-82827851 or 13827205072, or email [email protected].