Benefits of TPE Two-Color Injection Molding in Zhejiang

\n\tTPE elastomer soft rubber can be adjusted to the appropriate hardness according to the product's physical property requirements (hardness range Shore 25-90A),\n

\n

\n\tTransparent TPE is used in stationery, sports equipment, etc. It has good UV resistance, chemical resistance, and is easy to color and process.\n

\n

\n\tTPE high-transparency material has different product properties in different applications. Thermoplastic elastomer, also called TPE material, transparent TPE not only has the processing properties of thermoplastic plastics, but also has the physical properties of vulcanized rubber. This is the so-called advantageous combination of plastics and rubber. Transparent TPE is widely used in people's daily production and life.\n

\nTPE two-color injection molding\n

\n\n

\nAnd suitable physical properties (such as wear resistance, scratch resistance, adhesion, melt index, etc.). It provides various possible material application solutions for different products.\n

\n
\n

\n

\n\tPOM overmolding of POM. Although POM has a low melting point of only 180°C.\n

\n

\n\tTransparent TPE, specifically speaking, is a thermoplastic elastomer, while TPR is translated from English, strictly speaking, it is called thermoplastic rubber. This is the most basic difference. TPE is generally modified and shaped from the basic material SEBS, while TPR is modified from the basic material SBS.\n

\n

\n\tTo achieve the matte appearance of thermosetting rubber surfaces, a rougher mold surface is required. Generally speaking, the rough surface produced after EDM (electrical discharge machining) of the mold cavity will result in excellent workpiece appearance and make demolding relatively simple. Grinding methods such as steam blasting, sandblasting, or shot blasting, as well as chemical etching, can also be used to create surfaces with different gloss and appearance.\n

\nTPE two-color injection molding\n

\n\n

\nHowever, due to its high crystallinity, forming a fusion layer on the encapsulation surface requires a higher energy. At the same time, due to the self-lubricating property of POM, it is not conducive to the rapid encapsulation of TPE material on the surface of POM hard plastic parts.\n

\n
\n

\n

\n\tJuye focuses on the R&D, production and sales of TPE toy materials and TPE soft rubber,\n

\n

\n\tTo prevent contamination of TPE raw materials and the presence of old materials or impurities in the recesses of the screw and accessories, especially materials with poor thermal stability, before use and after shutdown, the parts should be cleaned with screw cleaner to ensure no impurities adhere.\n

\n

\n\tTransparent TPE is used in stationery, sports equipment, etc. It has good UV resistance, chemical resistance, and is easy to color and process.\n

\nTPE two-color injection molding\n

\n\n

\nIt can be used for injection molding of soft toys, simulated animal toys, plant toys, fruit toys, etc. The provided TPE has excellent color matching and spray oil properties, is environmentally friendly and non-toxic, and can provide customized TPE toy material solutions according to customers' specific requirements.\n

\n
\n