Is Hunan Natural Color TPE Manufacturer Cheap?

TPE overmolding generally uses a two-shot injection molding process,

Transparent grade is divided into transparent and translucent series, each with multiple softness and hardness; excellent transparency; smooth and soft surface; good yellowing resistance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

TPE high-transparency material has different product performance in different applications. Thermoplastic elastomer, also known as TPE material, transparent TPE not only has the processing properties of thermoplastic plastics, but also the physical properties of vulcanized rubber. This is the advantageous combination of the advantages of plastics and rubber. Transparent TPE is widely used in people's life and production.

Natural Color TPE Manufacturer

Fix the already injection-molded hard plastic part onto the overmolding mold, then under suitable temperature, injection overmold the TPE soft material onto the hard part, and cool to obtain the product. The injection temperature for overmolding depends on the hard material being overmolded.

TPE overmolding generally uses a two-shot injection molding process, that is, fixing the injection-molded hard plastic part onto the overmolding mold,

Styrenic transparent TPE is widely used in the footwear industry, largely replacing rubber; at the same time, its use in industrial rubber products such as rubber sheets and plates is also expanding.

Transparent TPE is used in appliance housings, handles, grips, etc. It exhibits very good touch, is anti-slip, saves effort, and is easy to color and process. It also has a wide design space.

Natural Color TPE Manufacturer

Then under suitable temperature, injection overmold the TPE soft material onto the hard part, and cool to obtain the product. The injection temperature for overmolding depends on the hard material being overmolded.

When using a regular injection molding machine for two-shot overmolding on nylon, it is recommended before overmolding,

To achieve the matte appearance of thermoset rubber, a rougher mold surface is required. Generally, the rough surface produced after electrical discharge machining (EDM) of the mold cavity will produce an excellent workpiece appearance and make demolding relatively easy. Grinding methods such as steam blasting, sandblasting, or shot blasting, as well as chemical etching, can also be used to produce surfaces with different gloss and appearance.

Transparent grade is divided into transparent and translucent series, each with multiple softness and hardness; excellent transparency; smooth and soft surface; good yellowing resistance, tear resistance, good tensile strength; meets environmental requirements; suitable for various transparent series products.

Natural Color TPE Manufacturer

First preheat and bake the nylon part because nylon has strong water absorption, and overmolding requires higher molding temperatures; preheating before overmolding can remove moisture, facilitating quick hot overmolding.